ST STM32F2

HAL TIM Generic Driver
UM1940
580/1371
DocID028236 Rev 2
HAL_TIM_OC_DeInit()
HAL_TIM_OC_MspInit()
HAL_TIM_OC_MspDeInit()
HAL_TIM_OC_Start()
HAL_TIM_OC_Stop()
HAL_TIM_OC_Start_IT()
HAL_TIM_OC_Stop_IT()
HAL_TIM_OC_Start_DMA()
HAL_TIM_OC_Stop_DMA()
45.2.5 Time PWM functions
This section provides functions allowing to:
Initialize and configure the TIM OPWM.
De-initialize the TIM PWM.
Start the Time PWM.
Stop the Time PWM.
Start the Time PWM and enable interrupt.
Stop the Time PWM and disable interrupt.
Start the Time PWM and enable DMA transfer.
Stop the Time PWM and disable DMA transfer.
This section contains the following APIs:
HAL_TIM_PWM_Init()
HAL_TIM_PWM_DeInit()
HAL_TIM_PWM_MspInit()
HAL_TIM_PWM_MspDeInit()
HAL_TIM_PWM_Start()
HAL_TIM_PWM_Stop()
HAL_TIM_PWM_Start_IT()
HAL_TIM_PWM_Stop_IT()
HAL_TIM_PWM_Start_DMA()
HAL_TIM_PWM_Stop_DMA()
45.2.6 Time Input Capture functions
This section provides functions allowing to:
Initialize and configure the TIM Input Capture.
De-initialize the TIM Input Capture.
Start the Time Input Capture.
Stop the Time Input Capture.
Start the Time Input Capture and enable interrupt.
Stop the Time Input Capture and disable interrupt.
Start the Time Input Capture and enable DMA transfer.
Stop the Time Input Capture and disable DMA transfer.
This section contains the following APIs:
HAL_TIM_IC_Init()
HAL_TIM_IC_DeInit()
HAL_TIM_IC_MspInit()
HAL_TIM_IC_MspDeInit()
HAL_TIM_IC_Start()
HAL_TIM_IC_Stop()