ST STM32F2 User Manual

UM1940
HAL IRDA Generic Driver
DocID028236 Rev 2
337/1371
Notes
This procedure could be used for aborting any ongoing
transfer started in Interrupt or DMA mode. This procedure
performs following operations : Disable PPP InterruptsDisable
the DMA transfer in the peripheral register (if enabled)Abort
DMA transfer by calling HAL_DMA_Abort_IT (in case of
transfer in DMA mode)Set handle State to READYAt abort
completion, call user abort complete callback
This procedure is executed in Interrupt mode, meaning that
abort procedure could be considered as completed only when
user abort complete callback is executed (not when exiting
function).
HAL_IRDA_AbortTransmit_IT
Function name
HAL_StatusTypeDef HAL_IRDA_AbortTransmit_IT
(IRDA_HandleTypeDef * hirda)
Function description
Abort ongoing Transmit transfer (Interrupt mode).
Parameters
hirda: IRDA handle.
Return values
HAL: status
Notes
This procedure could be used for aborting any ongoing
transfer started in Interrupt or DMA mode. This procedure
performs following operations : Disable PPP InterruptsDisable
the DMA transfer in the peripheral register (if enabled)Abort
DMA transfer by calling HAL_DMA_Abort_IT (in case of
transfer in DMA mode)Set handle State to READYAt abort
completion, call user abort complete callback
This procedure is executed in Interrupt mode, meaning that
abort procedure could be considered as completed only when
user abort complete callback is executed (not when exiting
function).
HAL_IRDA_AbortReceive_IT
Function name
HAL_StatusTypeDef HAL_IRDA_AbortReceive_IT
(IRDA_HandleTypeDef * hirda)
Function description
Abort ongoing Receive transfer (Interrupt mode).
Parameters
hirda: IRDA handle.
Return values
HAL: status
Notes
This procedure could be used for aborting any ongoing
transfer started in Interrupt or DMA mode. This procedure
performs following operations : Disable PPP InterruptsDisable
the DMA transfer in the peripheral register (if enabled)Abort
DMA transfer by calling HAL_DMA_Abort_IT (in case of
transfer in DMA mode)Set handle State to READYAt abort
completion, call user abort complete callback
This procedure is executed in Interrupt mode, meaning that
abort procedure could be considered as completed only when
user abort complete callback is executed (not when exiting
function).

ST STM32F2 Specifications

General

Brand	ST
Model	STM32F2
Category	Microcontrollers
Language	English