ST STM32F2 User Manual

HAL TIM Generic Driver
UM1940
586/1371
DocID028236 Rev 2
HAL_TIM_OC_Start
Function name
HAL_StatusTypeDef HAL_TIM_OC_Start (TIM_HandleTypeDef
* htim, uint32_t Channel)
Function description
Starts the TIM Output Compare signal generation.
Parameters
htim: pointer to a TIM_HandleTypeDef structure that
contains the configuration information for TIM module.
Channel: TIM Channel to be enabled. This parameter can be
one of the following values:
TIM_CHANNEL_1: TIM Channel 1 selected
TIM_CHANNEL_2: TIM Channel 2 selected
TIM_CHANNEL_3: TIM Channel 3 selected
TIM_CHANNEL_4: TIM Channel 4 selected
Return values
HAL: status
HAL_TIM_OC_Stop
Function name
HAL_StatusTypeDef HAL_TIM_OC_Stop (TIM_HandleTypeDef
* htim, uint32_t Channel)
Function description
Stops the TIM Output Compare signal generation.
Parameters
htim: pointer to a TIM_HandleTypeDef structure that
contains the configuration information for TIM module.
Channel: TIM Channel to be disabled. This parameter can
be one of the following values:
TIM_CHANNEL_1: TIM Channel 1 selected
TIM_CHANNEL_2: TIM Channel 2 selected
TIM_CHANNEL_3: TIM Channel 3 selected
TIM_CHANNEL_4: TIM Channel 4 selected
Return values
HAL: status
HAL_TIM_OC_Start_IT
Function name
HAL_StatusTypeDef HAL_TIM_OC_Start_IT
(TIM_HandleTypeDef * htim, uint32_t Channel)
Function description
Starts the TIM Output Compare signal generation in interrupt
mode.
Parameters
htim: pointer to a TIM_HandleTypeDef structure that
contains the configuration information for TIM module.
Channel: TIM Channel to be enabled. This parameter can be
one of the following values:
TIM_CHANNEL_1: TIM Channel 1 selected
TIM_CHANNEL_2: TIM Channel 2 selected
TIM_CHANNEL_3: TIM Channel 3 selected
TIM_CHANNEL_4: TIM Channel 4 selected
Return values
HAL: status
HAL_TIM_OC_Stop_IT
Function name
HAL_StatusTypeDef HAL_TIM_OC_Stop_IT

ST STM32F2 Specifications

General

Brand	ST
Model	STM32F2
Category	Microcontrollers
Language	English