ST STM32F2 User Manual

UM1940
HAL TIM Generic Driver
DocID028236 Rev 2
603/1371
TIM_DMABASE_EGR
TIM_DMABASE_CCMR1
TIM_DMABASE_CCMR2
TIM_DMABASE_CCER
TIM_DMABASE_CNT
TIM_DMABASE_PSC
TIM_DMABASE_ARR
TIM_DMABASE_RCR
TIM_DMABASE_CCR1
TIM_DMABASE_CCR2
TIM_DMABASE_CCR3
TIM_DMABASE_CCR4
TIM_DMABASE_BDTR
TIM_DMABASE_DCR
BurstRequestSrc: TIM DMA Request sources. This
parameters can be on of the following values:
TIM_DMA_UPDATE: TIM update Interrupt source
TIM_DMA_CC1: TIM Capture Compare 1 DMA source
TIM_DMA_CC2: TIM Capture Compare 2 DMA source
TIM_DMA_CC3: TIM Capture Compare 3 DMA source
TIM_DMA_CC4: TIM Capture Compare 4 DMA source
TIM_DMA_COM: TIM Commutation DMA source
TIM_DMA_TRIGGER: TIM Trigger DMA source
BurstBuffer: The Buffer address.
BurstLength: DMA Burst length. This parameter can be one
value between TIM_DMABURSTLENGTH_1TRANSFER and
TIM_DMABURSTLENGTH_18TRANSFERS.
Return values
HAL: status
HAL_TIM_DMABurst_ReadStop
Function name
HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop
(TIM_HandleTypeDef * htim, uint32_t BurstRequestSrc)
Function description
Stop the DMA burst reading.
Parameters
htim: pointer to a TIM_HandleTypeDef structure that
contains the configuration information for TIM module.
BurstRequestSrc: TIM DMA Request sources to disable.
Return values
HAL: status
HAL_TIM_GenerateEvent
Function name
HAL_StatusTypeDef HAL_TIM_GenerateEvent
(TIM_HandleTypeDef * htim, uint32_t EventSource)
Function description
Generate a software event.
Parameters
htim: pointer to a TIM_HandleTypeDef structure that
contains the configuration information for TIM module.
EventSource: specifies the event source. This parameter
can be one of the following values:
TIM_EVENTSOURCE_UPDATE: Timer update Event
source

ST STM32F2 Specifications

General

Brand	ST
Model	STM32F2
Category	Microcontrollers
Language	English