45.2.9 IRQ handler management
This section provides Timer IRQ handler function.
This section contains the following APIs:
HAL_TIM_IRQHandler()
45.2.10 Peripheral Control functions
This section provides functions allowing to:
Configure The Input Output channels for OC, PWM, IC or One Pulse mode.
Configure External Clock source.
Configure Complementary channels, break features and dead time.
Configure Master and the Slave synchronization.
Configure the DMA Burst Mode.
This section contains the following APIs:
HAL_TIM_OC_ConfigChannel()
HAL_TIM_IC_ConfigChannel()
HAL_TIM_PWM_ConfigChannel()
HAL_TIM_OnePulse_ConfigChannel()
HAL_TIM_DMABurst_WriteStart()
HAL_TIM_DMABurst_WriteStop()
HAL_TIM_DMABurst_ReadStart()
HAL_TIM_DMABurst_ReadStop()
HAL_TIM_GenerateEvent()
HAL_TIM_ConfigOCrefClear()
HAL_TIM_ConfigClockSource()
HAL_TIM_ConfigTI1Input()
HAL_TIM_SlaveConfigSynchronization()
HAL_TIM_SlaveConfigSynchronization_IT()
HAL_TIM_ReadCapturedValue()
45.2.11 TIM Callbacks functions
This section provides TIM callback functions:
Timer Period elapsed callback
Timer Output Compare callback
Timer Input capture callback
Timer Trigger callback
Timer Error callback
This section contains the following APIs:
HAL_TIM_PeriodElapsedCallback()
HAL_TIM_OC_DelayElapsedCallback()
HAL_TIM_IC_CaptureCallback()
HAL_TIM_PWM_PulseFinishedCallback()
HAL_TIM_TriggerCallback()
HAL_TIM_ErrorCallback()
45.2.12 Peripheral State functions
This subsection permits to get in run-time the status of the peripheral and the data flow.
To Next Page
Loading...
Need help?
General
