ST STM32F2 User Manual

UM1940
LL DMA Generic Driver
DocID028236 Rev 2
905/1371
LL_DMA_STREAM_2
LL_DMA_STREAM_3
LL_DMA_STREAM_4
LL_DMA_STREAM_5
LL_DMA_STREAM_6
LL_DMA_STREAM_7
Return values
State: of bit (1 or 0).
Reference Manual to
LL API cross
reference:
CR TEIE LL_DMA_IsEnabledIT_TE
LL_DMA_IsEnabledIT_TC
Function name
__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TC
(DMA_TypeDef * DMAx, uint32_t Stream)
Function description
Check if Transfer complete interrup is enabled.
Parameters
DMAx: DMAx Instance
Stream: This parameter can be one of the following values:
LL_DMA_STREAM_0
LL_DMA_STREAM_1
LL_DMA_STREAM_2
LL_DMA_STREAM_3
LL_DMA_STREAM_4
LL_DMA_STREAM_5
LL_DMA_STREAM_6
LL_DMA_STREAM_7
Return values
State: of bit (1 or 0).
Reference Manual to
LL API cross
reference:
CR TCIE LL_DMA_IsEnabledIT_TC
LL_DMA_IsEnabledIT_DME
Function name
__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_DME
(DMA_TypeDef * DMAx, uint32_t Stream)
Function description
Check if Direct mode error interrupt is enabled.
Parameters
DMAx: DMAx Instance
Stream: This parameter can be one of the following values:
LL_DMA_STREAM_0
LL_DMA_STREAM_1
LL_DMA_STREAM_2
LL_DMA_STREAM_3
LL_DMA_STREAM_4
LL_DMA_STREAM_5
LL_DMA_STREAM_6
LL_DMA_STREAM_7
Return values
State: of bit (1 or 0).
Reference Manual to
CR DMEIE LL_DMA_IsEnabledIT_DME

ST STM32F2 Specifications

General

Brand	ST
Model	STM32F2
Category	Microcontrollers
Language	English