ST STM32F2

LL DMA Generic Driver
UM1940
876/1371
DocID028236 Rev 2
reference:
LL_DMA_SetPeriphAddress
Function name
__STATIC_INLINE void LL_DMA_SetPeriphAddress
(DMA_TypeDef * DMAx, uint32_t Stream, uint32_t
PeriphAddress)
Function description
Set the Peripheral address.
Parameters
DMAx: DMAx Instance
Stream: This parameter can be one of the following values:
LL_DMA_STREAM_0
LL_DMA_STREAM_1
LL_DMA_STREAM_2
LL_DMA_STREAM_3
LL_DMA_STREAM_4
LL_DMA_STREAM_5
LL_DMA_STREAM_6
LL_DMA_STREAM_7
PeriphAddress: Between 0 to 0xFFFFFFFF
Return values
None:
Notes
Interface used for direction
LL_DMA_DIRECTION_PERIPH_TO_MEMORY or
LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
This API must not be called when the DMA channel is
enabled.
Reference Manual to
LL API cross
reference:
PAR PA LL_DMA_SetPeriphAddress
LL_DMA_GetMemoryAddress
Function name
__STATIC_INLINE uint32_t LL_DMA_GetMemoryAddress
(DMA_TypeDef * DMAx, uint32_t Stream)
Function description
Get the Memory address.
Parameters
DMAx: DMAx Instance
Stream: This parameter can be one of the following values:
LL_DMA_STREAM_0
LL_DMA_STREAM_1
LL_DMA_STREAM_2
LL_DMA_STREAM_3
LL_DMA_STREAM_4
LL_DMA_STREAM_5
LL_DMA_STREAM_6
LL_DMA_STREAM_7
Return values
Between: 0 to 0xFFFFFFFF
Notes
Interface used for direction
LL_DMA_DIRECTION_PERIPH_TO_MEMORY or
LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.