ST STM32F2

HAL TIM Extension Driver
UM1940
632/1371
DocID028236 Rev 2
HAL_TIMEx_OCN_Stop()
HAL_TIMEx_OCN_Start_IT()
HAL_TIMEx_OCN_Stop_IT()
HAL_TIMEx_OCN_Start_DMA()
HAL_TIMEx_OCN_Stop_DMA()
46.2.5 Timer Complementary PWM functions
This section provides functions allowing to:
Start the Complementary PWM.
Stop the Complementary PWM.
Start the Complementary PWM and enable interrupts.
Stop the Complementary PWM and disable interrupts.
Start the Complementary PWM and enable DMA transfers.
Stop the Complementary PWM and disable DMA transfers.
Start the Complementary Input Capture measurement.
Stop the Complementary Input Capture.
Start the Complementary Input Capture and enable interrupts.
Stop the Complementary Input Capture and disable interrupts.
Start the Complementary Input Capture and enable DMA transfers.
Stop the Complementary Input Capture and disable DMA transfers.
Start the Complementary One Pulse generation.
Stop the Complementary One Pulse.
Start the Complementary One Pulse and enable interrupts.
Stop the Complementary One Pulse and disable interrupts.
This section contains the following APIs:
HAL_TIMEx_PWMN_Start()
HAL_TIMEx_PWMN_Stop()
HAL_TIMEx_PWMN_Start_IT()
HAL_TIMEx_PWMN_Stop_IT()
HAL_TIMEx_PWMN_Start_DMA()
HAL_TIMEx_PWMN_Stop_DMA()
46.2.6 Timer Complementary One Pulse functions
This section provides functions allowing to:
Start the Complementary One Pulse generation.
Stop the Complementary One Pulse.
Start the Complementary One Pulse and enable interrupts.
Stop the Complementary One Pulse and disable interrupts.
This section contains the following APIs:
HAL_TIMEx_OnePulseN_Start()
HAL_TIMEx_OnePulseN_Stop()
HAL_TIMEx_OnePulseN_Start_IT()
HAL_TIMEx_OnePulseN_Stop_IT()
46.2.7 Peripheral Control functions
This section provides functions allowing to:
Configure The Input Output channels for OC, PWM, IC or One Pulse mode.
Configure External Clock source.