EasyManua.ls Logo

ST STM32F2

ST STM32F2
1371 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
UM1940
HAL I2S Generic Driver
DocID028236 Rev 2
319/1371
HAL_I2S_MspDeInit
Function name
void HAL_I2S_MspDeInit (I2S_HandleTypeDef * hi2s)
Function description
I2S MSP DeInit.
Parameters
hi2s: pointer to a I2S_HandleTypeDef structure that contains
the configuration information for I2S module
Return values
None:
HAL_I2S_Transmit
Function name
HAL_StatusTypeDef HAL_I2S_Transmit (I2S_HandleTypeDef *
hi2s, uint16_t * pData, uint16_t Size, uint32_t Timeout)
Function description
Transmit an amount of data in blocking mode.
Parameters
hi2s: pointer to a I2S_HandleTypeDef structure that contains
the configuration information for I2S module
pData: a 16-bit pointer to data buffer.
Size: number of data sample to be sent:
Timeout: Timeout duration
Return values
HAL: status
Notes
When a 16-bit data frame or a 16-bit data frame extended is
selected during the I2S configuration phase, the Size
parameter means the number of 16-bit data length in the
transaction and when a 24-bit data frame or a 32-bit data
frame is selected the Size parameter means the number of
16-bit data length.
The I2S is kept enabled at the end of transaction to avoid the
clock de-synchronization between Master and Slave(example:
audio streaming).
HAL_I2S_Receive
Function name
HAL_StatusTypeDef HAL_I2S_Receive (I2S_HandleTypeDef *
hi2s, uint16_t * pData, uint16_t Size, uint32_t Timeout)
Function description
Receive an amount of data in blocking mode.
Parameters
hi2s: pointer to a I2S_HandleTypeDef structure that contains
the configuration information for I2S module
pData: a 16-bit pointer to data buffer.
Size: number of data sample to be sent:
Timeout: Timeout duration
Return values
HAL: status
Notes
When a 16-bit data frame or a 16-bit data frame extended is
selected during the I2S configuration phase, the Size
parameter means the number of 16-bit data length in the
transaction and when a 24-bit data frame or a 32-bit data
frame is selected the Size parameter means the number of
16-bit data length.
The I2S is kept enabled at the end of transaction to avoid the
clock de-synchronization between Master and Slave(example:
audio streaming).

Table of Contents

Related product manuals