ST STM32F2 User Manual

UM1940
HAL TIM Generic Driver
DocID028236 Rev 2
581/1371
HAL_TIM_IC_Start_IT()
HAL_TIM_IC_Stop_IT()
HAL_TIM_IC_Start_DMA()
HAL_TIM_IC_Stop_DMA()
45.2.7 Time One Pulse functions
This section provides functions allowing to:
Initialize and configure the TIM One Pulse.
De-initialize the TIM One Pulse.
Start the Time One Pulse.
Stop the Time One Pulse.
Start the Time One Pulse and enable interrupt.
Stop the Time One Pulse and disable interrupt.
Start the Time One Pulse and enable DMA transfer.
Stop the Time One Pulse and disable DMA transfer.
This section contains the following APIs:
HAL_TIM_OnePulse_Init()
HAL_TIM_OnePulse_DeInit()
HAL_TIM_OnePulse_MspInit()
HAL_TIM_OnePulse_MspDeInit()
HAL_TIM_OnePulse_Start()
HAL_TIM_OnePulse_Stop()
HAL_TIM_OnePulse_Start_IT()
HAL_TIM_OnePulse_Stop_IT()
45.2.8 Time Encoder functions
This section provides functions allowing to:
Initialize and configure the TIM Encoder.
De-initialize the TIM Encoder.
Start the Time Encoder.
Stop the Time Encoder.
Start the Time Encoder and enable interrupt.
Stop the Time Encoder and disable interrupt.
Start the Time Encoder and enable DMA transfer.
Stop the Time Encoder and disable DMA transfer.
This section contains the following APIs:
HAL_TIM_Encoder_Init()
HAL_TIM_Encoder_DeInit()
HAL_TIM_Encoder_MspInit()
HAL_TIM_Encoder_MspDeInit()
HAL_TIM_Encoder_Start()
HAL_TIM_Encoder_Stop()
HAL_TIM_Encoder_Start_IT()
HAL_TIM_Encoder_Stop_IT()
HAL_TIM_Encoder_Start_DMA()
HAL_TIM_Encoder_Stop_DMA()

ST STM32F2 Specifications

General

Brand	ST
Model	STM32F2
Category	Microcontrollers
Language	English