ST STM32F2 User Manual

HAL CORTEX Generic Driver
UM1940
122/1371
DocID028236 Rev 2
9 HAL CORTEX Generic Driver
9.1 CORTEX Firmware driver registers structures
9.1.1 MPU_Region_InitTypeDef
Data Fields
uint8_t Enable
uint8_t Number
uint32_t BaseAddress
uint8_t Size
uint8_t SubRegionDisable
uint8_t TypeExtField
uint8_t AccessPermission
uint8_t DisableExec
uint8_t IsShareable
uint8_t IsCacheable
uint8_t IsBufferable
Field Documentation
uint8_t MPU_Region_InitTypeDef::Enable
Specifies the status of the region. This parameter can be a value of
CORTEX_MPU_Region_Enable
uint8_t MPU_Region_InitTypeDef::Number
Specifies the number of the region to protect. This parameter can be a value of
CORTEX_MPU_Region_Number
uint32_t MPU_Region_InitTypeDef::BaseAddress
Specifies the base address of the region to protect.
uint8_t MPU_Region_InitTypeDef::Size
Specifies the size of the region to protect. This parameter can be a value of
CORTEX_MPU_Region_Size
uint8_t MPU_Region_InitTypeDef::SubRegionDisable
Specifies the number of the subregion protection to disable. This parameter must be a
number between Min_Data = 0x00 and Max_Data = 0xFF
uint8_t MPU_Region_InitTypeDef::TypeExtField
Specifies the TEX field level. This parameter can be a value of
CORTEX_MPU_TEX_Levels
uint8_t MPU_Region_InitTypeDef::AccessPermission
Specifies the region access permission type. This parameter can be a value of
CORTEX_MPU_Region_Permission_Attributes
uint8_t MPU_Region_InitTypeDef::DisableExec
Specifies the instruction access status. This parameter can be a value of
CORTEX_MPU_Instruction_Access
uint8_t MPU_Region_InitTypeDef::IsShareable
Specifies the shareability status of the protected region. This parameter can be a
value of CORTEX_MPU_Access_Shareable
uint8_t MPU_Region_InitTypeDef::IsCacheable
Specifies the cacheable status of the region protected. This parameter can be a value
of CORTEX_MPU_Access_Cacheable

ST STM32F2 Specifications

General

Brand	ST
Model	STM32F2
Category	Microcontrollers
Language	English