ST STM32F2

LL DMA Generic Driver
UM1940
902/1371
DocID028236 Rev 2
Function description
Enable FIFO error interrupt.
Parameters
DMAx: DMAx Instance
Stream: This parameter can be one of the following values:
LL_DMA_STREAM_0
LL_DMA_STREAM_1
LL_DMA_STREAM_2
LL_DMA_STREAM_3
LL_DMA_STREAM_4
LL_DMA_STREAM_5
LL_DMA_STREAM_6
LL_DMA_STREAM_7
Return values
None:
Reference Manual to
LL API cross
reference:
FCR FEIE LL_DMA_EnableIT_FE
LL_DMA_DisableIT_HT
Function name
__STATIC_INLINE void LL_DMA_DisableIT_HT (DMA_TypeDef
* DMAx, uint32_t Stream)
Function description
Disable Half transfer interrupt.
Parameters
DMAx: DMAx Instance
Stream: This parameter can be one of the following values:
LL_DMA_STREAM_0
LL_DMA_STREAM_1
LL_DMA_STREAM_2
LL_DMA_STREAM_3
LL_DMA_STREAM_4
LL_DMA_STREAM_5
LL_DMA_STREAM_6
LL_DMA_STREAM_7
Return values
None:
Reference Manual to
LL API cross
reference:
CR HTIE LL_DMA_DisableIT_HT
LL_DMA_DisableIT_TE
Function name
__STATIC_INLINE void LL_DMA_DisableIT_TE (DMA_TypeDef
* DMAx, uint32_t Stream)
Function description
Disable Transfer error interrupt.
Parameters
DMAx: DMAx Instance
Stream: This parameter can be one of the following values:
LL_DMA_STREAM_0
LL_DMA_STREAM_1
LL_DMA_STREAM_2
LL_DMA_STREAM_3
LL_DMA_STREAM_4
LL_DMA_STREAM_5