ST STM32F2 User Manual

UM1940
HAL TIM Generic Driver
DocID028236 Rev 2
601/1371
Function description
Configures the TIM in Slave mode.
Parameters
htim: pointer to a TIM_HandleTypeDef structure that
contains the configuration information for TIM module.
sSlaveConfig: pointer to a TIM_SlaveConfigTypeDef
structure that contains the selected trigger (internal trigger
input, filtered timer input or external trigger input) and the )
and the Slave mode (Disable, Reset, Gated, Trigger, External
clock mode 1).
Return values
HAL: status
HAL_TIM_SlaveConfigSynchronization_IT
Function name
HAL_StatusTypeDef
HAL_TIM_SlaveConfigSynchronization_IT
(TIM_HandleTypeDef * htim, TIM_SlaveConfigTypeDef *
sSlaveConfig)
Function description
Configures the TIM in Slave mode in interrupt mode.
Parameters
htim: TIM handle.
sSlaveConfig: pointer to a TIM_SlaveConfigTypeDef
structure that contains the selected trigger (internal trigger
input, filtered timer input or external trigger input) and the )
and the Slave mode (Disable, Reset, Gated, Trigger, External
clock mode 1).
Return values
HAL: status
HAL_TIM_DMABurst_WriteStart
Function name
HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart
(TIM_HandleTypeDef * htim, uint32_t BurstBaseAddress,
uint32_t BurstRequestSrc, uint32_t * BurstBuffer, uint32_t
BurstLength)
Function description
Configure the DMA Burst to transfer Data from the memory to the
TIM peripheral.
Parameters
htim: pointer to a TIM_HandleTypeDef structure that
contains the configuration information for TIM module.
BurstBaseAddress: TIM Base address from when the DMA
will starts the Data write. This parameters can be on of the
following values:
TIM_DMABASE_CR1
TIM_DMABASE_CR2
TIM_DMABASE_SMCR
TIM_DMABASE_DIER
TIM_DMABASE_SR
TIM_DMABASE_EGR
TIM_DMABASE_CCMR1
TIM_DMABASE_CCMR2
TIM_DMABASE_CCER
TIM_DMABASE_CNT
TIM_DMABASE_PSC
TIM_DMABASE_ARR

ST STM32F2 Specifications

General

Brand	ST
Model	STM32F2
Category	Microcontrollers
Language	English