ST STM32F2 User Manual

UM1940
HAL CRYP Generic Driver
DocID028236 Rev 2
143/1371
Return values
HAL: status
HAL_CRYP_AESCTR_Decrypt
Function name
HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt
(CRYP_HandleTypeDef * hcryp, uint8_t * pCypherData,
uint16_t Size, uint8_t * pPlainData, uint32_t Timeout)
Function description
Initializes the CRYP peripheral in AES CTR decryption mode then
decrypted pCypherData.
Parameters
hcryp: pointer to a CRYP_HandleTypeDef structure that
contains the configuration information for CRYP module
pCypherData: Pointer to the cyphertext buffer
Size: Length of the plaintext buffer, must be a multiple of 16.
pPlainData: Pointer to the plaintext buffer
Timeout: Specify Timeout value
Return values
HAL: status
HAL_CRYP_AESECB_Encrypt_IT
Function name
HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_IT
(CRYP_HandleTypeDef * hcryp, uint8_t * pPlainData, uint16_t
Size, uint8_t * pCypherData)
Function description
Initializes the CRYP peripheral in AES ECB encryption mode using
Interrupt.
Parameters
hcryp: pointer to a CRYP_HandleTypeDef structure that
contains the configuration information for CRYP module
pPlainData: Pointer to the plaintext buffer
Size: Length of the plaintext buffer, must be a multiple of 16
bytes
pCypherData: Pointer to the cyphertext buffer
Return values
HAL: status
HAL_CRYP_AESCBC_Encrypt_IT
Function name
HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_IT
(CRYP_HandleTypeDef * hcryp, uint8_t * pPlainData, uint16_t
Size, uint8_t * pCypherData)
Function description
Initializes the CRYP peripheral in AES CBC encryption mode
using Interrupt.
Parameters
hcryp: pointer to a CRYP_HandleTypeDef structure that
contains the configuration information for CRYP module
pPlainData: Pointer to the plaintext buffer
Size: Length of the plaintext buffer, must be a multiple of 16
bytes
pCypherData: Pointer to the cyphertext buffer
Return values
HAL: status

ST STM32F2 Specifications

General

Brand	ST
Model	STM32F2
Category	Microcontrollers
Language	English