ST STM32F2

UM1940
HAL ETH Generic Driver
DocID028236 Rev 2
223/1371
__HAL_ETH_DMARXDESC_DISABLE_IT
Description:
Disables the specified DMA Rx Desc
receive interrupt.
Parameters:
__HANDLE__: ETH Handle
Return value:
None
__HAL_ETH_DMARXDESC_SET_OWN_
BIT
Description:
Set the specified DMA Rx Desc Own bit.
Parameters:
__HANDLE__: ETH Handle
Return value:
None
__HAL_ETH_DMATXDESC_GET_COLLI
SION_COUNT
Description:
Returns the specified ETHERNET DMA
Tx Desc collision count.
Parameters:
__HANDLE__: ETH Handle
Return value:
The: Transmit descriptor collision
counter value.
__HAL_ETH_DMATXDESC_SET_OWN_
BIT
Description:
Set the specified DMA Tx Desc Own bit.
Parameters:
__HANDLE__: ETH Handle
Return value:
None
__HAL_ETH_DMATXDESC_ENABLE_IT
Description:
Enables the specified DMA Tx Desc
Transmit interrupt.
Parameters:
__HANDLE__: ETH Handle
Return value:
None
__HAL_ETH_DMATXDESC_DISABLE_IT
Description:
Disables the specified DMA Tx Desc
Transmit interrupt.