ST STM32F2 User Manual

HAL ETH Generic Driver
UM1940
234/1371
DocID028236 Rev 2
the maximum value
ETH_MMC_IT_TGFMSC: When Tx
good multi col counter reaches half
the maximum value
ETH_MMC_IT_TGFSC : When Tx
good single col counter reaches
half the maximum value
Return value:
None
__HAL_ETH_WAKEUP_EXTI_ENABLE_I
T
Description:
Enables the ETH External interrupt line.
Return value:
None
__HAL_ETH_WAKEUP_EXTI_DISABLE_I
T
Description:
Disables the ETH External interrupt line.
Return value:
None
__HAL_ETH_WAKEUP_EXTI_ENABLE_E
VENT
Description:
Enable event on ETH External event
line.
Return value:
None.
__HAL_ETH_WAKEUP_EXTI_DISABLE_
EVENT
Description:
Disable event on ETH External event
line.
Return value:
None.
__HAL_ETH_WAKEUP_EXTI_GET_FLAG
Description:
Get flag of the ETH External interrupt
line.
Return value:
None
__HAL_ETH_WAKEUP_EXTI_CLEAR_FL
AG
Description:
Clear flag of the ETH External interrupt
line.
Return value:
None
__HAL_ETH_WAKEUP_EXTI_ENABLE_R
ISING_EDGE_TRIGGER
Description:
Enables rising edge trigger to the ETH

ST STM32F2 Specifications

General

Brand	ST
Model	STM32F2
Category	Microcontrollers
Language	English