ST STM32F2 User Manual

UM1940
HAL RTC Generic Driver
DocID028236 Rev 2
481/1371
Return value:
None.
__HAL_RTC_ALARM_EXTI_ENABLE_RISING_FALLIN
G_EDGE
Description:
Enable rising & falling
edge trigger on the RTC
Alarm associated Exti line.
Return value:
None.
__HAL_RTC_ALARM_EXTI_DISABLE_RISING_FALLIN
G_EDGE
Description:
Disable rising & falling
edge trigger on the RTC
Alarm associated Exti line.
Return value:
None.
__HAL_RTC_ALARM_EXTI_GET_FLAG
Description:
Check whether the RTC
Alarm associated Exti line
interrupt flag is set or not.
Return value:
Line: Status.
__HAL_RTC_ALARM_EXTI_CLEAR_FLAG
Description:
Clear the RTC Alarm
associated Exti line flag.
Return value:
None.
__HAL_RTC_ALARM_EXTI_GENERATE_SWIT
Description:
Generate a Software
interrupt on RTC Alarm
associated Exti line.
Return value:
None.
RTC Flags Definitions
RTC_FLAG_TAMP1F
RTC_FLAG_TSOVF
RTC_FLAG_TSF
RTC_FLAG_WUTF
RTC_FLAG_ALRBF
RTC_FLAG_ALRAF
RTC_FLAG_INITF

ST STM32F2 Specifications

General

Brand	ST
Model	STM32F2
Category	Microcontrollers
Language	English