ST STM32F2 - Page 499

UM1940
HAL RTC Extension Driver
DocID028236 Rev 2
499/1371
and Timestamp associated Exti line.
Return value:
None.
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_
DISABLE_EVENT
Description:
Disable event on the RTC Tamper
and Timestamp associated Exti line.
Return value:
None.
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_
ENABLE_FALLING_EDGE
Description:
Enable falling edge trigger on the
RTC Tamper and Timestamp
associated Exti line.
Return value:
None.
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_
DISABLE_FALLING_EDGE
Description:
Disable falling edge trigger on the
RTC Tamper and Timestamp
associated Exti line.
Return value:
None.
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_
ENABLE_RISING_EDGE
Description:
Enable rising edge trigger on the
RTC Tamper and Timestamp
associated Exti line.
Return value:
None.
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_
DISABLE_RISING_EDGE
Description:
Disable rising edge trigger on the
RTC Tamper and Timestamp
associated Exti line.
Return value:
None.
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_
ENABLE_RISING_FALLING_EDGE
Description:
Enable rising & falling edge trigger
on the RTC Tamper and Timestamp
associated Exti line.
Return value:
None.
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_
DISABLE_RISING_FALLING_EDGE
Description:
Disable rising & falling edge trigger