ST STM32F2 - Page 561

UM1940
HAL SPI Generic Driver
DocID028236 Rev 2
561/1371
SPI_BAUDRATEPRESCALER_64
SPI_BAUDRATEPRESCALER_128
SPI_BAUDRATEPRESCALER_256
SPI Clock Phase
SPI_PHASE_1EDGE
SPI_PHASE_2EDGE
SPI Clock Polarity
SPI_POLARITY_LOW
SPI_POLARITY_HIGH
SPI CRC Calculation
SPI_CRCCALCULATION_DISABLE
SPI_CRCCALCULATION_ENABLE
SPI Data Size
SPI_DATASIZE_8BIT
SPI_DATASIZE_16BIT
SPI Direction Mode
SPI_DIRECTION_2LINES
SPI_DIRECTION_2LINES_RXONLY
SPI_DIRECTION_1LINE
SPI Error Code
HAL_SPI_ERROR_NONE
No error
HAL_SPI_ERROR_MODF
MODF error
HAL_SPI_ERROR_CRC
CRC error
HAL_SPI_ERROR_OVR
OVR error
HAL_SPI_ERROR_FRE
FRE error
HAL_SPI_ERROR_DMA
DMA transfer error
HAL_SPI_ERROR_FLAG
Flag: RXNE,TXE, BSY
SPI Exported Macros
__HAL_SPI_RESET_HANDLE_STATE
Description:
Reset SPI handle state.
Parameters:
__HANDLE__: specifies the SPI Handle.
This parameter can be SPI where x: 1, 2, or
3 to select the SPI peripheral.
Return value:
None
__HAL_SPI_ENABLE_IT
Description: