ST STM32F2

UM1940
HAL SPI Generic Driver
DocID028236 Rev 2
563/1371
empty flag
SPI_FLAG_CRCERR: CRC error flag
SPI_FLAG_MODF: Mode fault flag
SPI_FLAG_OVR: Overrun flag
SPI_FLAG_BSY: Busy flag
SPI_FLAG_FRE: Frame format error
flag
Return value:
The: new state of __FLAG__ (TRUE or
FALSE).
__HAL_SPI_CLEAR_CRCERRFLAG
Description:
Clear the SPI CRCERR pending flag.
Parameters:
__HANDLE__: specifies the SPI Handle.
This parameter can be SPI where x: 1, 2, or
3 to select the SPI peripheral.
Return value:
None
__HAL_SPI_CLEAR_MODFFLAG
Description:
Clear the SPI MODF pending flag.
Parameters:
__HANDLE__: specifies the SPI Handle.
This parameter can be SPI where x: 1, 2, or
3 to select the SPI peripheral.
Return value:
None
__HAL_SPI_CLEAR_OVRFLAG
Description:
Clear the SPI OVR pending flag.
Parameters:
__HANDLE__: specifies the SPI Handle.
This parameter can be SPI where x: 1, 2, or
3 to select the SPI peripheral.
Return value:
None
__HAL_SPI_CLEAR_FREFLAG
Description:
Clear the SPI FRE pending flag.
Parameters:
__HANDLE__: specifies the SPI Handle.
This parameter can be SPI where x: 1, 2, or
3 to select the SPI peripheral.
Return value: