ST STM32F2

HAL USART Generic Driver
UM1940
688/1371
DocID028236 Rev 2
USART_IT_RXNE: Receive
Data register not empty
interrupt
USART_IT_IDLE: Idle line
detection interrupt
USART_IT_PE: Parity Error
interrupt
USART_IT_ERR: Error
interrupt(Frame error, noise
error, overrun error) This
parameter can be: ENABLE or
DISABLE.
Return value:
None
__HAL_USART_DISABLE_IT
__HAL_USART_GET_IT_SOURCE
Description:
Checks whether the specified
USART interrupt has occurred or
not.
Parameters:
__HANDLE__: specifies the
USART Handle. This parameter
can be USARTx where x: 1, 2, 3 or
6 to select the USART peripheral.
__IT__: specifies the USART
interrupt source to check. This
parameter can be one of the
following values:
USART_IT_TXE: Transmit
Data Register empty interrupt
USART_IT_TC: Transmission
complete interrupt
USART_IT_RXNE: Receive
Data register not empty
interrupt
USART_IT_IDLE: Idle line
detection interrupt
USART_IT_ERR: Error
interrupt
USART_IT_PE: Parity Error
interrupt
Return value:
The: new state of __IT__ (TRUE or
FALSE).
__HAL_USART_ONE_BIT_SAMPLE_ENABLE
Description:
Macro to enable the USART's one
bit sample method.
Parameters: