TP-Link T2600G-28TS - Show Password-Recovery; Show User Account-List

86
Example
Specify the communication baud rate on the console port to the default value:
T2600G-28TS(config)# no serial_port
12.14 show password-recovery
Description
The show password-recovery command is used to display the status of the
password-recovery feature.
Syntax
show password-recovery
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Display the status of the password-recovery feature:
T2600G-28TS(config)# show password-recovery
12.15 show user account-list
Description
The show user account-list command is used to display the information of the
current users.
Syntax
show user account-list
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.