TP-Link T2600G-28TS - 13.9 802.1 X

267
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure the region name of MST as “region1”:
T2600G-28TS(config)# spanning-tree mst configuration
T2600G-28TS(config-mst)# name region1
34.9 revision
Description
The revision command is used to configure the revision level of MST instance.
Syntax
revision revision
Parameters
revision —— The revision level for MST region identification, ranging from 0 to
65535.
Command Mode
MST Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure the revision level of MST as 100:
T2600G-28TS(config)# spanning-tree mst configuration
T2600G-28TS(config-mst)# revision 100
34.10 spanning-tree mst instance
Description
The spanning-tree mst instance command is used to configure the priority of
MST instance. To return to the default value of MST instance priority, please use
no spanning-tree mst instance command.
Syntax
spanning-tree mst instance instance-id priority pri