TP-Link T2600G-28TS - Show Ethernet-Oam Statistics

290
Parameter
port —— The Gigabit Ethernet port number. By default, the Ethernet OAM event
logs of all ports are displayed.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Display Ethernet OAM event log of Gigabit Ethernet port 1/0/2:
T2600G-28TS(config)# show ethernet-oam event-log interface
gigabitEthernet 1/0/2
35.14 show ethernet-oam statistics
Description
The show ethernet-oam statistics command is used to display the Ethernet
OAM statistics.
Syntax
show ethernet-oam statistics [ interface gigabitEthernet port ]
Parameter
port —— The Gigabit Ethernet port number. By default, the Ethernet OAM
statistics of all ports are displayed.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Display Ethernet OAM statistics of Gigabit Ethernet port 1/0/2:
T2600G-28TS(config)# show ethernet-oam statistics interface
gigabitEthernet 1/0/2