TP-Link T2600G-28TS - Show Ip Dhcp Snooping; Show Ip Dhcp Snooping Interface

111
T2600G-28TS(config)#show ip source binding
15.13 show ip dhcp snooping
Description
The show ip dhcp snooping command is used to display the running status of
DHCP Snooping.
Syntax
show ip dhcp snooping
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the running status of DHCP Snooping:
T2600G-28TS#show ip dhcp snooping
15.14 show ip dhcp snooping interface
Description
The show ip dhcp snooping interface command is used to display the DHCP
Snooping configuration of a desired Gigabit Ethernet port/port channel or of all
Ethernet ports/port channels.
Syntax
show ip dhcp snooping interface [ gigabitEthernet port | port-channel
port-channel-id ]
Parameters
port —— The Ethernet port number.
port-channel-id —— The ID of the port channel.
Command Mode
Privileged EXEC Mode and Any Configuration Mode