TP-Link T2600G-28TS - Show Lldp; Show Lldp Interface

369
40.12 show lldp
Description
The show lldp command is used to display the global configuration of LLDP.
Syntax
show lldp
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the global configuration of LLDP:
T2600G-28TS#show lldp
40.13 show lldp interface
Description
The show lldp interface command is used to display LLDP configuration of the
corresponding port. By default, the LLDP configuration of all the ports will be
displayed.
Syntax
show lldp interface [ gigabitEthernet port ]
Parameters
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the LLDP configuration of Gigabit Ethernet port 1/0/1:
T2600G-28TS#show lldp interface gigabitEthernet 1/0/1