430
Example
Specify the remote ID as “TP-LINK”:
T2600G-28TS(config)# ip dhcp relay information remote-id TP-LINK
46.8 show ip dhcp relay
Description
The show ip dhcp relay command is used to display the global status and
Option 82 configuration of DHCP Relay.
Syntax
show ip dhcp relay
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the configuration of DHCP Relay:
T2600G-28TS(config)# show ip dhcp relay
To Previous Page
Loading...
