TP-Link T2600G-28TS - Show Rmon Event; Show Rmon Alarm

359
Privilege Requirement
Only Admin level users have access to these commands.
Example
Display the configuration of all history sample entries:
T2600G-28TS# show rmon history
39.24 show rmon event
Description
The show rmon event command is used to display the configuration of
SNMP-RMON Event.
Syntax
show rmon event [ index ]
Parameter
index —— The index number of the entry selected to display the configuration,
ranging from 1 to 12, in the format of 1-3, 5. You can select more than one entry
for each command. By default, the configuration of all SNMP-RMON enabled
entries is displayed.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Display the Event configuration of entry1-4:
T2600G-28TS# show rmon event 1-4
39.25 show rmon alarm
Description
The show rmon alarm command is used to display the configuration of the
Alarm Management entry.
Syntax
show rmon alarm [ index ]