TP-Link T2600G-28TS - Chapter 38 MLD Snooping Commands; Ipv6 Mld Snooping(Global); Ipv6 Mld Snooping(Interface)

320
Chapter 38 MLD Snooping Commands
MLD Snooping (Multicast Listener Discovery Snooping) is a multicast control mechanism running
on Layer 2 switch. It can effectively prevent multicast groups being broadcasted in the IPv6
network.
38.1 ipv6 mld snooping(global)
Description
The ipv6 mld snooping command is used to enable MLD Snooping function
globally. If this function is disabled, all related MLD Snooping function would not
work. To disable this function, please use no ipv6 mld snooping command.
Syntax
ipv6 mld snooping
no ipv6 mld snooping
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Enable MLD Snooping:
T2600G-28TS(config)# ipv6 mld snooping
38.2 ipv6 mld snooping(interface)
Description
The ipv6 mld snooping command is used to enable MLD Snooping function on
the desired port. To disable this function, please use no ipv6 mld snooping
command.
Syntax
ipv6 mld snooping
no ipv6 mld snooping
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet / interface port-channel / interface range port-channel)
Privilege Requirement
Only Admin and Operator level users have access to these commands.