TP-Link T2600G-28TS - Ip Igmp Snooping Multi-Vlan-Config (Router-Port-Forbidden); Ip Igmp Snooping Multi-Vlan-Config (Source-Ip-Replace)

306
37.13 ip igmp snooping multi-vlan-config
(router-port-forbidden)
Description
This command is used to forbid the specified ports as being router ports in the
specified multicast VLAN. To delete the forbidden router ports, please use no ip
igmp snooping multi-vlan-config router-ports-forbidd command.
Syntax
ip igmp snooping multi-vlan-config [ vlan-id ] router-port-forbidd interface
{ gigabitEthernet port-list | port-channel port-channel-id }
no ip igmp snooping multi-vlan-config router-port-forbidd [ interface
{ gigabitEthernet port-list | port-channel port-channel-id } ]
Parameter
vlan-id—— The ID of the multicast VLAN.
port-list —— Forbid the specified ports as being router ports. Packets sent from
multicast routers to these ports will be discarded.
port-channel-id —— Forbid the specified port-channels as being router ports.
Packets sent from multicast routers to these port-channels will be discarded.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Forbid the Ethernet ports 1/0/1-3 as being router ports in multicast VLAN 1 :
T2600G-28TS(config)# ip igmp snooping multi-vlan-config 1
router-port-forbidd interface gigabitEthernet 1/0/1-3
37.14 ip igmp snooping multi-vlan-config
(source-ip-replace)
Description
This command is used to replace the multicast source IP address of the IGMP
packets in the specified multicast VLAN. To delete the forbidden router ports,