TP-Link T2600G-28TS - Show Ip Verify Source; Show Ip Verify Source Interface

124
17.2 show ip verify source
Description
The show ip verify source command is used to display the IP Verify Source
configuration information.
Syntax
show ip verify source
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the IP Verify Source configuration information:
T2600G-28TS(config)#show ip verify source
17.3 show ip verify source interface
Description
The show ip verify source interface command is used to display the IP verify
source configuration of a desired Gigabit Ethernet port.
Syntax
show ip verify source interface gigabitEthernet port
Parameters
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the IP verify source configuration of Gigabit Ethernet port 1/0/5:
T2600G-28TS#show ip verify source interface gigabitEthernet 1/0/5