TP-Link T2600G-28TS - Show Interface Configuration

219
Description
The show interface counters command is used to display the statistics
information of all ports/port channels.
Syntax
show interface counters [ gigabitEthernet port ] [ port-channel
port-channel-id ]
Parameter
port —— The Ethernet port number.
port-channel-id
—— The ID of the port channel.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the statistics information of all Ethernet ports and port channels:
T2600G-28TS(config)# show interface counters
Display the statistics information of port 1/0/2:
T2600G-28TS(config)# show interface counters gigabitEthernet 1/0/2
28.15 show interface configuration
Description
The show interface configuration command is used to display the
configurations of all ports and port channels, including Port-status, Flow Control,
Negotiation Mode and Port-description.
Syntax
show interface configuration [ gigabitEthernet port ] [ port-channel
port-channel-id ]
Parameter
port —— The Ethernet port number.
port-channel-id
—— The ID of the port channel.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.