TP-Link T2600G-28TS - Show Logging Loghost; Show Logging Buffer

161
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the configuration of the Local Log:
T2600G-28TS(config)# show logging local-config
23.13 show logging loghost
Description
The show logging loghost command is used to display the configuration of the
log host.
Syntax
show logging loghost [ index ]
Parameter
index ——The index of the log host whose configuration will be displayed,
ranging from 1 to 4. Display the configuration of all the log hosts by default.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the configuration of the log host 2:
T2600G-28TS(config)# show logging loghost 2
23.14 show logging buffer
Description
The show logging buffer command is used to display the log information in the
log buffer according to the severity level.