28
Syntax
interface vlan vlan-id
no interface vlan vlan-id
Parameter
vlan-id —— Specify IEEE 802.1Q VLAN ID, ranging from 1 to 4094.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Create VLAN Interface 2:
T2600G-28TS(config)# interface vlan 2
3.3 name
Description
The name command is used to assign a description to a VLAN. To clear the
description, please use no name command.
Syntax
name descript
no name
Parameter
descript ——String to describe the VLAN, which contains 16 characters at most.
Command Mode
VLAN Configuration Mode（VLAN）
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Specify the name of VLAN 2 as “group1”:
T2600G-28TS(config)# vlan 2
T2600G-28TS(config-vlan)# name group1
To Next Page
Loading...
