TP-Link T2600G-28TS - Show Ipv6 Mld Snooping Interface

336
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the global configuration of MLD Snooping:
T2600G-28TS(config)# show ipv6 mld snooping
38.25 show ipv6 mld snooping interface
Description
The show ipv6 mld snooping interface command is used to display the port
configuration of MLD snooping.
Syntax
show ipv6 mld snooping interface [ gigabitEthernet [ port | port-list ] ]
{ basic-config | max-groups | packet-stat }
show ipv6 mld snooping interface [ port-channel [ port-channel-id ] ]
{ basic-config | max-groups }
Parameter
port —— The Ethernet port number.
port-list —— The list of Ethernet ports.
basic-config | max-groups | packet-stat —— The related configuration
information selected to display.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the MLD baisic configuration configuration of all ports and port
channels:
T2600G-28TS# show ipv6 mld snooping interface basic-config
Display the MLD basic configuration of port 1/0/2:
T2600G-28TS# show ipv6 mld snooping interface gigabitEthernet 1/0/2
basic-config