TP-Link T2600G-28TS - 8.5 Statistics

119
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet / interface port-channel / interface range port-channel)
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure the maximum number of binding entries from ND Snooping of
Gigabit Ethernet port 1/0/2 is 100:
T2600G-28TS(config)#interface gigabitEthernet 1/0/2
T2600G-28TS(config-if)#ipv6 nd snooping max-entries 100
16.8 show ipv6 source binding
Description
The show ipv6 source binding command is used to display the
IPv6-MAC-VID- PORT binding table.
Syntax
show ipv6 source binding
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the IPv6-MAC-VID-PORT binding table:
T2600G-28TS(config)#show ipv6 source binding
16.9 show ipv6 dhcp snooping
Description
The show ipv6 dhcp snooping command is used to display the running status
of DHCPv6 Snooping.