TP-Link T2600G-28TS - Show Ip Igmp Snooping Interface

315
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the global configuration of IGMP:
T2600G-28TS# show ip igmp snooping
37.27 show ip igmp snooping interface
Description
The show ip igmp snooping interface command is used to display the port
configuration of IGMP snooping.
Syntax
show ip igmp snooping interface [ gigabitEthernet [ port | port-list ] ]
{ basic-config | max-groups | packet-stat }
show ip igmp snooping interface [ port-channel [ port-channel-id ] ]
{ basic-config | max-groups }
Parameter
port —— The Ethernet port number.
port-list —— The list of Ethernet ports.
basic-config | max-groups | packet-stat —— The related configuration
information selected to display.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the IGMP baisic configuration configuration of all ports and port
channels:
T2600G-28TS# show ip igmp snooping interface basic-config
Display the IGMP basic configuration of port 1/0/2:
T2600G-28TS# show ip igmp snooping interface gigabitEthernet 1/0/2
basic-config