TP-Link T2600G-28TS - Show Loopback-Detection Interface

240
Syntax
show loopback-detection global
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the global configuration of loopback detection function:
T2600G-28TS# show loopback-detection global
32.8 show loopback-detection interface
Description
The show loopback-detection interface command is used to display the
configuration of loopback detection function and the status of the specified
Ethernet port.
Syntax
show loopback-detection interface [ gigabitEthernet port ]
Parameter
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the configuration of loopback detection function and the status of all
ports:
T2600G-28TS# show loopback-detection interface
Display the configuration of loopback detection function and the status of port 5:
T2600G-28TS# show loopback-detection interface gigabitEthernet 1/0/5