TP-Link T2600G-28TS - Chapter 11 QoS

202
26.30 show cable-diagnostics interface
gigabitEthernet
Description
The show cable-diagnostics interface gigabitEthernet command is used to
display the cable diagnostics of the connected Ethernet Port., which facilitates
you to check the connection status of the cable connected to the switch, locate
and diagnose the trouble spot of the network.
Syntax
show cable-diagnostics interface gigabitEthernet port
Parameter
port —— The number of the port which is selected for Cable test.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Show the cable-diagnostics of port 3:
T2600G-28TS# show cable-diagnostics interface gigabitEthernet 1/0/3
26.31 show cpu-utilization
Description
The show cpu-utilization command is used to display the system’s CPU
utilization in the last 5 seconds/1minute/5minutes.
Syntax
show cpu-utilization
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.