TP-Link T2600G-28TS - 14.1 SNMP Config

288
Syntax
clear ethernet-oam statistics [ interface gigabitEthernet port ]
Parameter
port —— The Gigabit Ethernet port number. By default, the Ethernet OAM
statistics of all ports are cleared.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Clear Ethernet OAM statistics of Gigabit Ethernet port 1/0/3:
T2600G-28TS(config)# clear ethernet-oam statistics interface gigabit
Ethernet 1/0/3
35.11 clear ethernet-oam event-log
Description
The clear ethernet-oam event-log command is used to clear the Ethernet
OAM event log.
Syntax
clear ethernet-oam event-log [ interface gigabitEthernet port ]
Parameter
port ——The Gigabit Ethernet port number. By default, the Ethernet OAM event
logs of all ports are cleared.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Clear Ethernet OAM event log of Gigabit Ethernet port 1/0/3: