333
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Create the profile 1:
T2600G-28TS(config)# ipv6 mld profile 1
38.19 deny
Description
The deny command is used to configure the filtering mode of profile as deny.
Syntax
deny
Command Mode
Profile Configuration Mode
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Configure the filtering mode of profile 1 as deny:
T2600G-28TS(config)# ipv6 mld profile 1
T2600G-28TS(config-igmp-profile)#deny
38.20 permit
Description
The permit command is used to configure the filtering mode of profile as permit.
Syntax
permit
Command Mode
Profile Configuration Mode
Privilege Requirement
Only Admin and Operator level users have access to these commands.
To Next Page
Loading...
