TP-Link T2600G-28TS - Show Mac Address-Table Security

180
Syntax
show mac address-table notification { all | interface gigabitEthernet port }
Parameter
all —— Displays the notificaiton information globally and of all the Ethernet ports.
port —— Displays the notification information on the specified port.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the notificaiton configuration of all the ports:
T2600G-28TS(config)# show mac address-table notification all
25.17 show mac address-table security
Description
The show mac address-table security command is used to display the MAC
address security configuration globally or of the specified VLAN.
Syntax
show mac address-table security [ vid vid ]
Parameter
vid ——The specified VLAN id.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the MAC address security configuration of VLAN 1:
T2600G-28TS(config)# show mac address-table security vid 1