TP-Link T2600G-28TS - Show Lldp Traffic Interface

371
Example
Display the neighbor information of Gigabit Ethernet port 1/0/1:
T2600G-28TS#show lldp neighbor-information interface gigabitEthernet
1/0/1
40.16 show lldp traffic interface
Description
The show lldp traffic interface command is used to display the LLDP statistic
information between the local device and neighbor device of the corresponding
port. By default, the LLDP statistic information of all the ports will be displayed.
Syntax
show lldp traffic interface [ gigabitEthernet port ]
Parameters
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the LLDP statistic information of Gigabit Ethernet port 1/0/1:
T2600G-28TS#show lldp traffic interface gigabitEthernet 1/0/1