TP-Link T2600G-28TS - Ip Dhcp Relay Information Circuit-ID; Ip Dhcp Relay Information Remote-ID

429
46.6 ip dhcp relay information circuit-id
Description
The ip dhcp relay information circuit-id command is used to specify the
custom circuit ID when option 82 customization is enabled. To clear the circuit
ID, please use no ip dhcp relay information circuit-id command.
Syntax
ip dhcp relay information circuit-id circuitID
no ip dhcp relay information circuit-id
Parameter
circuitID —— Specify the circuit ID, ranging from 1 to 64 characters.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Specify the circuit ID as “TP-LINK”:
T2600G-28TS(config)# ip dhcp relay information circuit-id TP-LINK
46.7 ip dhcp relay information remote-id
Description
The ip dhcp relay information remote-id command is used to specify the
custom remote ID when option 82 customization is enabled. To clear the remote
ID, please use no ip dhcp relay information remote-id command.
Syntax
ip dhcp relay information remote-id remoteID
no ip dhcp relay information remote-id
Parameter
remoteID —— Specify the remote ID, ranging from 1 to 64 characters.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.