TP-Link T2600G-28TS - 13.6 ND Detection

262
Privilege Requirement
Only Admin level users have access to these commands.
Example
Display all the spanning-tree debug messages:
T2600G-28TS# debug spanning-tree all
34.2 spanning-tree(global)
Description
The spanning-tree command is used to enable STP function globally. To
disable the STP function, please use no spanning-tree command.
Syntax
spanning-tree
no spanning-tree
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Enable the STP function:
T2600G-28TS(config)# spanning-tree
34.3 spanning-tree(interface)
Description
The spanning-tree command is used to enable STP function for a port. To
disable the STP function, please use no spanning-tree command.
Syntax
spanning-tree
no spanning-tree
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet / interface port-channel / interface range port-channel)