TP-Link T2600G-28TS - Show Voice Vlan Switchport

68
Example
Display the configuration information of Voice VLAN OUI:
T2600G-28TS(config)# show voice vlan oui
10.9 show voice vlan switchport
Description
The show voice vlan switchport command is used to display the Voice VLAN
configuration information of a specified port/port channel.
Syntax
show voice vlan switchport [ gigabitEthernet port | port-channel
port-channel-id ]
Parameter
port —— The Ethernet port number.
port-channel-id —— The ID of the port channel.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Display the Voice VLAN configuration information of all ports and port channels:
T2600G-28TS(config)# show voice vlan switchport
Display the Voice VLAN configuration information of port 1/0/2:
T2600G-28TS(config)# show voice vlan switchport gigabitEthernet 1/0/2