TP-Link T2600G-28TS - Line Ssh; Login Authentication(Ssh)

405
44.20 line ssh
Description
The line ssh command is used to enter the Line Configuration Mode to
configure the ssh terminal line to which you want to apply the authentication list.
Syntax
line ssh
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Enter the ssh terminal line configuration mode:
T2600G-28TS(config)#line ssh
44.21 login authentication(ssh)
Description
The login authentication command is used to apply the login authentication
method list to the ssh terminal line. To restore to the default authentication
method list, please use the no login authentication command.
Syntax
login authentication { method-list }
no login authentication
Parameter
method-list —— Specify the login method list on the ssh terminal line. It is
“default” by default, which contains the method “local”.
Command Mode
Line Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.