TP-Link T2600G-28TS - Show Ipv6 Verify Source; Show Ipv6 Verify Source Interface

126
T2600G-28TS(config-if-range)#ipv6 verify source sipv6+mac
18.2 show ipv6 verify source
Description
The show ipv6 verify source command is used to display the IPv6 Verify
Source configuration information.
Syntax
show ipv6 verify source
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the IPv6 Verify Source configuration information:
T2600G-28TS(config)#show ipv6 verify source
18.3 show ipv6 verify source interface
Description
The show ipv6 verify source interface command is used to display the IPv6
verify source configuration of a desired Gigabit Ethernet port.
Syntax
show ipv6 verify source interface gigabitEthernet port
Parameters
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.