TP-Link T2600G-28TS - Holiday(Global); Access-List Create

244
T2600G-28TS(config-time-range)#holiday
33.5 holiday(global)
Description
The holiday command is used to define a holiday. To delete the corresponding
holiday, please use no holiday command.
Syntax
holiday name start-date start-date end-date end-date
no holiday
Parameter
name —— The holiday name, ranging from 1 to 16 characters.
start-date —— The start date of the holiday, in the format of MM/DD, for
instance, 05/01.
end-date —— The end date of the holiday, in the format of MM/DD, for instance,
05/03.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Define National Day, configuring the start date as October 1st, and the end date
as October 3rd:
T2600G-28TS(config)#holiday nationalday start-date 10/01 end-date 10/03
33.6 access-list create
Description
The access-list create command is used to create standard-IP ACL, extend-IP
ACL, combined ACL and IPv6 ACL.
Syntax
access-list create access-list-num