TP-Link T2600G-28TS - Show Ipv6 Dhcp Snooping Interface

120
Syntax
show ipv6 dhcp snooping
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the running status of DHCPv6 Snooping:
T2600G-28TS#show ipv6 dhcp snooping
16.10 show ipv6 dhcp snooping interface
Description
The show ipv6 dhcp snooping interface command is used to display the
DHCPv6 Snooping configuration of a desired Gigabit Ethernet port/port channel
or of all Ethernet ports/port channels.
Syntax
show ipv6 dhcp snooping interface [ gigabitEthernet port | port-channel
port-channel-id ]
Parameters
port —— The Ethernet port number.
port-channel-id —— The ID of the port channel.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the DHCPv6 Snooping configuration of all Ethernet ports and port
channels:
T2600G-28TS#show ipv6 dhcp snooping interface